QT6-15/QT4-15 Fully Automatic Concrete Block Molding Machine
More efficient, energy-saving, and with shorter product molding time
- Imported high-performance hydraulic proportional system genuine parts (more efficient, energy-saving)
- Imported smart PLC touch screen and genuine electrical components (highly automated, easier to operate)
- Arch-type fast material spreading device (especially beneficial for porous bricks, more even)
- Extended high-efficiency vibration technology (shorter product forming time, higher density)
- Special high-temperature heat treatment (makes molds more wear-resistant and stronger)
Uses crushed stone powder, sand, gravel, cement, and can add large amounts of industrial waste like fly ash, slag, steel slag, coal rock, ceramsite, perlite, and more. One machine with multiple uses can produce blocks of various sizes just by changing the molds:
- Porous bricks and hollow blocks, etc.;
- Lightweight aggregate insulation blocks;
- Composite thermal insulation concrete blocks;
These products have good thermal insulation performance and can meet the new national energy-saving policy requirements.
Technical Specs
| Model | QT6-15 Parameter Table | QT4-15 Parameter Table |
|---|---|---|
| Vibration frequency | 3800-4500 (Times/Sub) | 3800-4500 (Times/Sub) |
| Total weight | 8 (T) | 6.8 (T) |
| Machine size | 7800*1800*3000 (mm) | 6600*1800*2800 (mm) |
| Total power | 43 (kw) | 33 (kw) |
| Cyele Time | 12-20 (s) | 12-18 (s) |
| Rated pressure | 31.5 mpa | 25 mpa |
| Vibration foree | 68 KN | 68 KN |
| Palletsize | 850*680*30 (mm) | 850*550*30 (mm) |
| Vibration type | hydraulic vibration | hydraulic vibration |
| Stacking machine power | 3.7 KW | 3.7 KW |
Production Table
| Production Table | QT6-15 Parameter Table | QT4-15 Parameter Table |
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Note: The above production table shows theoretical values. The molding cycle and main output depend on raw materials and product types. | ||
Foundation plan
